FIT2020 Networks and data communications 2 - Semester 2 , 2006 unit guide

Semester 2, 2006

Chief Examiner

Iqbal Gondal

Lecturers

Gippsland : Iqbal Gondal

Outline

* ASCED Discipline Group classification: 020113 Networks and Communications.

FIT2020 Networks and Data Communications II will introduce students to advances in the distributed networked environment. The unit provides knowledge of internetworking protocols, QoS for critical applications, network management and TCP/IP operation. Access to the university's computer systems through an internet service provider is compulsory for distance education students.

Objectives

On completion of this unit students should be able to:

 

  • describe the ISO OSI reference model
  • describe Internet protocol architecture
  • analyse the main functions and design issues of the network layer
  • describe the operation of IPv6
  • analyse the operation of TCP
  • understand network security risks, requirements, and common security measures
  • understand network management architecture
  • understand common Internet applications including email, ftp, telnet and the WWW
  • understand the basic concepts of multimedia communications and QoS
  •  

    Prerequisites

    Before attempting this unit you must have satisfactorily completed

    FIT1005

    , or equivalent.

    Unit relationships

    FIT2020 is a elective unit in the Networks and application development of the BITS.

    FIT1005 is a prerequisite unit that Before attempting this unit you must have completed FIT1005 or equivalent..

     

     

    Texts and software

    Required text(s)

    William Stallings, Data Communications and Networking, Prentice Hall, 7th Edition, 2004

    Textbook availability

    Text books are available from the Monash University Book Shops. Availability from other suppliers cannot be assured. The Bookshop orders texts in specifically for this unit. You are advised to purchase your text book early.

    Software requirements

    OPNET

    Software may be:

    • downloaded from www.opnet.com

    Hardware requirements

    Students studying off-campus are required to have the minimum system configuration specified by the Faculty as a condition of accepting admission, and regular Internet access. On-campus students, and those studying at supported study locations may use the facilities available in the computing labs. Information about computer use for students is available from the ITS Student Resource Guide in the Monash University Handbook. You will need to allocate up to n hours per week for use of a computer, including time for newsgroups/discussion groups.

    Recommended reading

    William Stallings, Data Communications and Networking, Prentice Hall, 7th Edition, 2004

    Library access

    You may need to access the Monash library either personally to be able to satisfactorily complete the subject.  Be sure to obtain a copy of the Library Guide, and if necessary, the instructions for remote access from the library website.

    Study resources

    Study resources for FIT2020 are:

    Printed Unit Book with 12 study guides, MUSO website, where discussion groups will be moderated by the lecturer 

    Unit website

    http://muso.monash.edu.au/

    Structure and organisation

    Week Topics
    1 Concepts of Protocols and Layered Architecture
    2 Network Layer Functions and Design Issues
    3 Internetworking
    4 The Internet and Routing Protocols
    5 IP Version 6 (IPv6) or IP New Generation (IPNG)
    6 Transport Services and Mechanisms
    7 Transport Protocol of the Internet – TCP and UDP
    8 Network Security 1
    9 Network Security 2
    10 Network Management and Internet Applications 1
    Non teaching week
    11 Internet Applications 2
    12 Multimedia Communications
    13 Revision

    Timetable

    The timetable for on-campus classes for this unit can be viewed in Allocate+

    Assessment

    Assessment weighting

    Assessment for the unit consists of 2 assignments with a weighting of 40% and an examination with a weighting of 60%.

    Assessment Policy

    To pass this unit you must:

    Nominally, the assignments will have a weighting of 40% and the exam a weighting of 60%. However, to encourage consistent performance, your final mark cannot be more than 10 marks higher than your assignment work percentage.

     

     


     

    Your score for the unit will be calculated by:

    final grade = min (A+10, E+10, E*R+A*(1–R))

    Assessment Requirements

    Assessment Due Date Weighting
    Assignment 1 20th August 2006 15%
    Assignment 2 8th October 2006 25 %
    The exam is 3 hours long and is closed book. Exam period (S2/06) starts on 23/10/06 60 %

    Assignment specifications will be made available MUSO.monash.edu.au.

    Assignment Submission

    Assignments will be submitted by electronic submission at muso.monash.edu.au in assignment section of the website

    Extensions and late submissions

    Late submission of assignments

    Assignments received after the due date will be subject to a penalty or will not be accepted

    This policy is strict because comments or guidance will be given on assignments as they are returned, and sample solutions may also be published and distributed, after assignment marking or with the returned assignment. 

    Extensions

    It is your responsibility to structure your study program around assignment deadlines, family, work and other commitments. Factors such as normal work pressures, vacations, etc. are seldom regarded as appropriate reasons for granting extensions. 

    Normally, there is no assignment extension.

    Grading of assessment

    Assignments, and the unit, will be marked and allocated a grade according to the following scale:

    Grade Percentage/description
    HD High Distinction - very high levels of achievement, demonstrated knowledge and understanding, skills in application and high standards of work encompassing all aspects of the tasks.
    In the 80+% range of marks for the assignment.
    D Distinction - high levels of achievement, but not of the same standards. May have a weakness in one particular aspect, or overall standards may not be quite as high.
    In the 70-79% range.
    C Credit - sound pass displaying good knowledge or application skills, but some weaknesses in the quality, range or demonstration of understanding.
    In the 60-69% range.
    P Pass acceptable standard, showing an adequate basic knowledge, understanding or skills, but with definite limitations on the extent of such understanding or application. Some parts may be incomplete.
    In the 50-59% range.
    N Not satisfactory failure to meet the basic requirements of the assessment.
    Below 50%.

    Assignment return

    We will aim to have assignment results made available to you within two weeks after assignment receipt.

    Feedback

    Feedback to you

    You will receive feedback on your work and progress in this unit. This feedback may be provided through your participation in tutorials and class discussions, as well as through your assignment submissions. It may come in the form of individual advice, marks and comments, or it may be provided as comment or reflection targeted at the group. It may be provided through personal interactions, such as interviews and on-line forums, or through other mechanisms such as on-line self-tests and publication of grade distributions.

    Feedback from you

    You will be asked to provide feedback to the Faculty through a Unit Evaluation survey at the end of the semester. You may also be asked to complete surveys to help teaching staff improve the unit and unit delivery. Your input to such surveys is very important to the faculty and the teaching staff in maintaining relevant and high quality learning experiences for our students.

    And if you are having problems

    It is essential that you take action immediately if you realise that you have a problem with your study. The semester is short, so we can help you best if you let us know as soon as problems arise. Regardless of whether the problem is related directly to your progress in the unit, if it is likely to interfere with your progress you should discuss it with your lecturer or a Community Service counsellor as soon as possible.

    Unit improvements

    Lab exercises have been inlcuded

    Plagiarism and cheating

    Plagiarism and cheating are regarded as very serious offences. In cases where cheating  has been confirmed, students have been severely penalised, from losing all marks for an assignment, to facing disciplinary action at the Faculty level. While we would wish that all our students adhere to sound ethical conduct and honesty, I will ask you to acquaint yourself with Student Rights and Responsibilities and the Faculty regulations that apply to students detected cheating as these will be applied in all detected cases.

    In this University, cheating means seeking to obtain an unfair advantage in any examination or any other written or practical work to be submitted or completed by a student for assessment. It includes the use, or attempted use, of any means to gain an unfair advantage for any assessable work in the unit, where the means is contrary to the instructions for such work. 

    When you submit an individual assessment item, such as a program, a report, an essay, assignment or other piece of work, under your name you are understood to be stating that this is your own work. If a submission is identical with, or similar to, someone else's work, an assumption of cheating may arise. If you are planning on working with another student, it is acceptable to undertake research together, and discuss problems, but it is not acceptable to jointly develop or share solutions unless this is specified by your lecturer. 

    Intentionally providing students with your solutions to assignments is classified as "assisting to cheat" and students who do this may be subject to disciplinary action. You should take reasonable care that your solution is not accidentally or deliberately obtained by other students. For example, do not leave copies of your work in progress on the hard drives of shared computers, and do not show your work to other students. If you believe this may have happened, please be sure to contact your lecturer as soon as possible.

    Cheating also includes taking into an examination any material contrary to the regulations, including any bilingual dictionary, whether or not with the intention of using it to obtain an advantage.

    Plagiarism involves the false representation of another person's ideas, or findings, as your own by either copying material or paraphrasing without citing sources. It is both professional and ethical to reference clearly the ideas and information that you have used from another writer. If the source is not identified, then you have plagiarised work of the other author. Plagiarism is a form of dishonesty that is insulting to the reader and grossly unfair to your student colleagues.

    Communication

    Communication methods

    MUSO discussion and for personal communication use email

    Notices

    Notices related to the unit during the semester will be placed on the announcements in the Unit Website. Check this regularly. Failure to read the Notices newsgroup is not regarded as grounds for special consideration.

    Consultation Times

    Tuesdays 2-5 PM

    If direct communication with your unit adviser/lecturer or tutor outside of consultation periods is needed you may contact the lecturer and/or tutors at:

    Dr Iqbal Gondal
    Senior Lecturer
    Phone +61 3 990 26669

    All email communication to you from your lecturer will occur through your Monash student email address. Please ensure that you read it regularly, or forward your email to your main address. Also check that your contact information registered with the University is up to date in My.Monash.

    Last updated: Jul 7, 2006